The AiD-H85 is a versatile RPAS (Remotely Piloted Aerial System) helicopter featuring an intermeshing double rotor design that does not require a tail rotor. This leads to an outstanding stability, reliability and an extraordinary lift capacity of 50 kg.
Raptor LE E2 delivers the ultimate long endurance platform.
The AiDrones AiD-MC8 unmanned aerial vehicle is an exclusively commercial project aimed primarily at civilian applications. In fact, the drone AiDrones AiD-MC8 is positioned as an industrial unmanned aerial vehicle. However, due to the rather wide scope of this device, it can be used for aerial photography and aerial photography, used for monitoring the environmental situation, applied for cartography and topography, For geological and geodetic exploration, etc.
Lightweight power module for UAVs and other portable applications
The Mini 8 has been designed to meet the needs of those operating in congested areas where flight weight needs to be kept to a minimum, but without a reduction in system redundancy. In the UK the sub 7 kg limit requires a take off weight below 7 Kgs for close quarter operations, and in most cases, to allow the ability to carry a reasonable payload, this means reducing aircraft weight by sacrificing redundancy.
The TeraRanger Hub kit is an obstacle avoidance sensor and makes it easy to connect multiple TerRanger sensors to a single power and data hub and to integrate the data stream to your control platform. This is great for times when you want sensors simultaneously monitoring multiple axes.The kit enables you to plug and play with up to eight distance sensors and obtain high-speed distance data from each sensor.
Concerned about your drone being jammed?Chronos’s CTL3510 GNSS Interference Detector with Event Logging is a handheld device designed to detect and quickly locate the presence of jamming signals from commercially available GPS jammers or too much power or interference in the GPS (L1) or Galileo (E1) bands.
With zero moving parts, TeraRanger Tower is a silent & reliable alternative to rotating LiDAR scanners for navigation and obstacle avoidance. It combines 8 TeraRanger One sensors in a circular array and the TeraRanger Hub to create a lightweight, fast (up to 270 Hz), and eye-safe scanner. Calibrated distance data is streamed from a USB or UART port as an array of synchronized distances, in millimetres.
Stream C is a new generation tactical UAS.
Mini-UAV that brings tactical UAV capabilities down to mini UAV level. EOS is a hand-launched and parachute-recovered electric mini UAV designed to deliver stable and clear imagery. EOS brings tactical UAV capabilities down to mini UAV level. Proudly tested and used in NATO ISAF and KFOR operations.
The Airlift series represent our heaviest lift systems to date, with payload capacities of up to 30 Kgs. The design features an extremely tough and resilient airframe, cross braced for ultimate strength and stiffness.
Fuel Cell Power for UAVs Intelligent Energy fuel cells extend flight times to UAVs presently constrained by the limitations of batteries. Flight durations of over three times that provided by batteries have been achieved. This product is currently available to UAV service providers, fleet operators and manufacturers.
TeraRanger Evo is the long range distance sensor of the TeraRanger family and is ideal for reliable altitude control, terrain following and anti-collision, both indoors and outdoors. Using LED Time-of-Flight technology (rather than lasers) the 9-gram distance sensor can measure distances up to a 60-meter range! In addition to its long-range capability, it has a modular two-part design, supporting a wide range of power, communication and connector options without additional cables.
Raptor EV is where high performance design meets VTOL versatility.
TeraRanger Multiflex is the modular & low-cost solution for simple obstacle avoidance on drones, indoors up to 2-meter range! It’s the ideal –and higher performance – alternative to ultrasound all in one convenient and easy to use kit. Each Multiflex kit includes up to eight plug-and-play sensor modules that can be connected to a flexible bus.
A small, lightweight & high-performance single-point distance measurement sensor using infrared LED Time-of-Flight technology for indoor and outdoor conditions. The lightweight design (only 8g), high performance (up to 1000 readings per second), low power consumption and stable datastream make it perfect for reliable altitude control, precision landing, terrain following and anti-collision, both indoors and outdoors.